This high-quality mini wire stripper by Luggar, is the perfect companion for professionals users
that working with a variety of cable types. Designed for use on coaxial cables (RG59, RG6, RG7, RG11),
round networking cables (Cat5, Cat5e, Cat6, Cat6a, Cat7, Cat8 and more), and flat telephone cables.

This Mini Wire Stripper Tool delivers clean and precise stripping every time, without damaging the inner
conductors. Its bright yellow color makes it easy to locate in any toolbox, while the integrated finger ring
ensures a comfortable grip during use.

Compact, efficient, and easy to carry – this is a must-have tool for any cable installation task.

Features:

• Suitable for RG59, RG6, RG7, RG11, round network cables and telephone cables.
• Ergonomic and comfortable design with hand ring.
• Easy operation – strip differents sizes of  differents cables.

הפוסט Mini Wire Stripper Tool הופיע ראשון בNBtech Group

Professional Keystone Jack Assembly Tool & Set
This tool is designed to streamline the termination process
of Ethernet cables CAT6A into Keystone Jacks.

Ideal for network installers and IT professionals, it ensures fast, reliable,
and consistent connections with minimal effort.

Installation Quick Guide

Simplify your network installation with our Keystone Jack Assembly Tool & set – designed
for effortless precision and speed. Strip 4 cm of the network cable using the integrated
cutting blade, then rotate and pull the cable for a clean strip. Separate the 8 individual
wires and insert them into the metal sleeve until the exposed section is fully covered.
Arrange the wires by color into the designated slots of the plastic cap for a secure and
organized connection.

Next, align the arrows on the Keystone Jack and plastic cap, and place the assembly
into the crimping tool. With a single motion, the handle presses the cap onto the jack,
securing the wires firmly in place. Finally, snap the metal sleeve into position to
complete the installation. Quick, accurate, and professional result.

הפוסט CAT6A keystone jack Tool & Set הופיע ראשון בNBtech Group

Metal crimping tool

This versatile metal crimping tool is designed for precise and efficient termination
of CAT plugs, making it an essential addition to any network technician’s toolkit.
Compatible with 8P and 6P connectors, it supports a wide range of cable types
including CAT5e, CAT6, CAT6A, CAT7, RJ11, and RJ12. Whether you’re setting up
home networks or working on large-scale installations, this tool delivers reliable,
high-quality results.

Built with a durable metal frame and an ergonomic handle, the crimping tool offers
both strength and comfort for extended use. In addition to crimping, it features
integrated stripping and cutting functions for added convenience and speed during
cable preparation. this tool have user-friendly design and professional-grade
performance.

הפוסט Metal crimping tool for CAT plug הופיע ראשון בNBtech Group

הפוסט Modular Crimping Tool – For RJ11, RJ12, RJ45 הופיע ראשון בNBtech Group

The kit comprises the 77HP High Power Tone Generator and the 200EP Inductive Amplifier in
a rugged woven polyester carrying case.

77HP Tone Generator

When it comes to tone generators, more technicians choose the 77HP over any other brand.
The 77 series Tone Generators have become an industry standard component in the tool kit of
technicians in all premises and outside plant wiring industries. The 77HP can be used on
twisted pair wiring (telecom, data, security /alarm, audio and electrical), single conductors,
coaxial cables, de-energized AC wiring and just about any other wiring you can think of.

200EP Inductive Amplifier

Powerful receiver gain permits accurate identification in even the most congested cable bundles
and equipment rooms. The 200EP includes a powerful 2 inch speaker and a recessed, on/off
push button control to prevent accidental operation. The 200EP offers adjustable volume control
for precise identification when tone signal ?bleed ? is affecting the identification process.
Additionally, the 200EP includes recessed tabs for buttset or headset connection that, when
connected, bypass the probes speaker. This is especially useful when working in noisy
environments or locations where the speaker noise may disturb customers.

Features:

• Fast, Accurate Wire Identification
• Sends Tone to Identify Wires
• Two Distinct Tone Signatures
• Polarity Indication
• Continuity Test
• Talk Battery supply
• Adjustable Volume Control
• Visual and Signal Strength Indication
• Large Speaker for Noisy Environments
• Facility for Headset/Buttset connection
• Choice of Metallic or Plastic Probe Tip
• 2-Line Modular Test Lead
• 3-Colour LED identifies AC Ring Voltage
• Rugged Industrial Design

Power Source:

• Battery:  1 x 9V
• Battery Life (nominal):  50 hours
• Operating Temperature:  0 Cº to 50 Cº (32 F to 122 F)
• Storage Temperature:  -50 Cº  to 75 Cº (-58 F to 167 F)
• Relative Humidity:  80%

הפוסט 701K Classic Tone and Probe Kit הופיע ראשון בNBtech Group

1. Locating & tracking buried and hidden wires .
2. Determining Which Receptacles are on specific circuits.
3. Pinpointing Drill Sites before drilling.
4. Detecting range: 1000 feet in length, 3 feet Depth.
5.White LED Flash Light .

Specifications:

Tone frequency:900Hz
Max Length distance :1000feet
Max depth distance:3 feet
Max.working current:Less than 70mA
Tone mode:1 Tone
Max.signal voltage:15Vp-p
Single display:Signal tone.Antenna
Voltage protection:AC 60V/DC 42V
Battery type:DC9.0V
Dimension:49*135*33mm
NF-816 Receiver specification
Frequency:900kHz
The Max.working current:Less than 70mA
Earjack:1
LEN illumination:2
Battery type:DC 9.0V

הפוסט Network Wire Tracker NF-816 הופיע ראשון בNBtech Group

Network Wire Tracker NF-806R handy support Trace telephone wire/LAN cable

Diagnose the breakage, open, short, cross. Visible indication: pin-to-pin cable map for individual cable (not by pairs).

Transmitter with RJ11 connector and pair of alligator clips. Low Voltage alarm function. Earphone permits use in noisy
environments. LED light assists use in dark corners.

Main functions:

1. Check and find the needed cables among so many cables in one time.

2. Continuity test — wiremap for Lan cables.

3. Diagnose the breakage, open, short, cross.

4. Visible indication: pin-to-pin cable map for individual cable (not by pairs).

5. Transmitter with RJ11 connector and pair of alligator clips.

6. Low Voltage alarm function.

7. Earphone permits use in noisy environments.

8. LED light assists use in dark corners.

Technical parameters:

הפוסט Network Wire Tracker הופיע ראשון בNBtech Group

1. PoE / PING testing.
2. Trace targeted cable among lots of unknown cables
3. Port flash function help trace lan cable connected to swticher or router visually,
   no need of receiver.
4. Capable of scanning cable on PoE switch without damaging the device.
5. Locate faults for RJ11/RJ45/BNC Cable
6. measure cable length accurately
7. Voltage detecting function.
8. 8 remotes included , improving work effiency.
9. Memory and storage function, export or upload the data from PC.
10. Built-in Lithium battery and color screen

Application:

1. 3.7V lithium battery power supply ,Convenient and durable.
2. 2.8 inches LCD Color screen ,Clear, intuitive and personalization.
3. can save and export 160 groups of data to computer (txt format).

Attention:

1.Don’t connect high voltage live lines to avoid buring out the machine.
2.Put into the right place to avoid hurting others,because our item with sharp part.
3.Connected the cable to the right port.
4.Read the user manual before use it.

Accessories Included:

• earphone x 1 set
• battery x 2 sets
• telephone line adapter x 1 set
• network cable adapter x 1 set
• Charging adaptor x 1 set
• Cable clips x 1 set

הפוסט Network Tester with Tracker & POE PING הופיע ראשון בNBtech Group

• Stripping
• Cutting
• Crimping

Specification:

• Argonomic design for profetional use
• High Quality & durable material
• Adjustable stopper – to control the length of the core strip.
• Stripper range 0.5mm – 6mm
• Easy to strip solid, stranded and romex wire
• Stripper & cutter without damaging the copper core
• Non-slip rubber grip – stable and easier to use

Overview:

Introducing the LUGGAR Professional Wire Stripper and Cutter – engineered for precision, durability, and efficiency.
Designed with high-hardness alloy steel jaws (HV 550–650 / RC52°–57°), this tool easily handles all wire types
ranging from 10 AWG to 24 AWG (0.2–6.0 mm²). Its precision-coated cutting blades (RC55°–60°) ensure clean,
effortless cuts every time. Compatible with insulated and non-insulated terminals (22–10 AWG / 0.5–6.0 mm²) as well
as auto ignition terminals (7–8 mm), this is the ultimate multi-function tool for professionals seeking quality and
performance in every grip.

הפוסט Profetional Wire Stripper Tool הופיע ראשון בNBtech Group

Engineered for precision and reliability, this high-performance modular crimping tool is ideal for
a wide rangeof plug types including 8P8C (RJ-45), 6P6C (RJ-12), 6P4C (RJ-11), 10P10C, 4P4C,
4P2C, and 6P6C DEC/OFF set plugs.

The built-in ratchet mechanism ensures a secure and complete crimp by preventing the tool from
opening until the crimping process is fully completed. Perfect for professional network installers
and technicians who demand consistent, high-quality results with every use.

Crimping modular plug:

• 8P8C RJ-45 plugs
• 6P6C RJ-12 plugs
• 6P4C RJ-11 plugs
• 4P4C & 4P2C plugs
• 6P6C DEC/OFF set plugs
• 10P10C

הפוסט Modular Crimping Tool with Ratchet הופיע ראשון בNBtech Group